Take Your Tech on a Trek!
Your quick, no-nonsense guide to getting the most out of your Walkabout Pouch.
For more detailed instructions, see How-to.
1. Getting your device ready
Two strips of Velcro are provided with your purchase, to attach your device to your WP. Use one or both Velcro strips on your device.
The strips have adhesive backing, and are the Velcro loop-side. The Velcro hook-side is on a section of the WP panel.
Pull the plastic backing off the Velcro strip. Stick the adhesive side of the Velcro to the back of your device or device case, centered as shown.
2. Putting on your WP
Lay the WP flat, panel side facing up. Release the side clips. Keep the top clips closed.
Put the WP on by bringing your head between the
shoulder straps, and then resting the front panel against your torso.
Fasten the side clips. Adjust straps as necessary, for a secure, comfortable fit.
3. Using your WP
Release the 2 top clips to allow the front panel to open away from the shoulders at about a 45° angle.
With the panel open, attach your device to the Velcro section. Use your device and access other items safely stowed in the inner pocket. Whenever they aren’t needed, bring the panel back to your torso and close the top clips.
​
Safety note: When you are ready to take off your WP, protect yourself and your belongings by first removing your device and stowed items.
When the WP is empty, release one of the side clips to remove the WP by pulling it up and over your head.
